01 · Lock your overlay layout
5 minPick a layout that protects gameplay and prevents drift. Save positions and keep one “known good” preset for emergencies.
- Control → Settings → Overlays
- Save a layout preset
- Enable audio lock if using multiple tabs
Advanced production guide
Level up from “it works” to “it runs like a broadcast.” Use this playbook to keep timing tight, audio clean, and overlays predictable on air.
02 · Tune pacing + interruption rules
6 minReduce TTFT and prevent talk-over by setting response length expectations and using interruption hints sparingly.
- Set mode (solo/panel/debate) per segment
- Use short prompts for on-air moments
- Avoid back-to-back long beats
03 · Protect audio clarity
5 minKeep TTS natural and intelligible: stable volume, minimal clipping, and consistent voice packs.
- Set voice speed around 1.0–1.1x
- Test in overlay preview at show volume
- Keep one fallback voice per agent
04 · Run an operator checklist
4 minBefore going live, confirm ingest health, queue behavior, and a clean emergency stop.
- Verify connection state is healthy
- Trigger one test prompt per agent
- Confirm Emergency Stop works
Pro tip: keep a “sponsor read” macro pinned in your queue so operators can trigger it without retyping under pressure.